Manual for vision fitness t 9250

Vision Fitness T9350 User Manual 61 pages

The treadmill will run through minimum and maximum speed and elevation. When auto-calibration is complete, it willtake about 30 seconds for the treadmill to reboot and return to the start-up screen. If you are unsure of the model num-ber, you can locate the number on the console masts.

Vision Fitness T9250 Parts List and Diagram -

If you areunsure of the model number, you can locate the number on the console masts. SIMPLE CONSOLE: DO NOT STAND ON THE BELT WHEN PERFORMING THE AUTO-CALIBRATION Once the treadmill is plugged in, you will need to confure and run auto-calibration.

<i>Vision</i> <i>Fitness</i> T9250 Premier <i>manual</i> -

Vision fitness t9250 treadmill. Vision fitness

Now you can perform auto-calibration by pressing START. “END” will appear when auto-calibration is complete. Set your treadmill to the correct model number (9250 or 9450) using the ELEVATION arrowkeys and the correct units (0 for miles and 1 for kilometers) using the SPEED arrow keys.

Vision Fitness T9250 Premier manual -

7 5 STEP Once the Treadmill is plugged in, you need to confure the Treadmill and perform auto-calibration for maximum performance.


Manual for vision fitness t 9250:

Rating: 95 / 100

Overall: 95 Rates