Nordberg g series crusher manual

BOBCAT 751 For Sale

Sheet steel used to be 1/4” thick Expanded metal window in bulkhead to match rear cab window Rear bulkhead to be constructed of ¼” plate Outside dimension of bulkhead to be 102” wide x 40” hh Two tool boxes mounted curbside in front of rear tires Compartment to be 60” long x 18” hh x 18” deep Door latches to be “T” handle twist-type with locks keyed alike Doors equipped with hold back chains Door openings to be sealed with automotive style bulb-type weather-stripping Compartment to be painted black 162,510 ft-lb capacity with three hydraulic extensions to 33’10” Lift Capacities: 8’2” – 19,180 lbs 14’1” – 11,460 lbs 19’8” – 8,050 lbs 26’3” – 5,950 lbs 33’6” – 4,630 lbs Working pressure, 4,640 psi Heht in folded position, 92” Width in folded position, 98” Install space required, 47” Crane & outrger weht, 6,700 lbs Radio remote, XS-Drive 6 function radio remote control system.

Jaw Crushers - Real Steel Limited

Stabilizer legs, manually tiltable 50deg (29”-55” below installation surface) Stabilizers are controlled from a separate, 4F stabilizer valve w/manual controls DMF model RW1630 front and 1630 rear railgear Insulated axles with one piece wheels Rail sweeps front and rear Slotted links Air brakes front with switch in cab Front bumper mounted sht rods Install and plumb front and rear railgear Aln and rail test Muncie 82 Series Air shift PTO Install tandem hydraulic pump (this pump provided for operation of loader and hirail) 50 gallon hydraulic oil reservoir mounted on curbside of chassis frame Heavy duty oil cooler Hydraulic return line filter to be located at reservoir 5/10 gpm tool circuit Hanney hose reel ½” x 50’ twin hose reel with roller guide – exits rear of body Electronic backup alarm mounted at rear of chassis All lhting to be recessed and conform to FMVSS 108 Amber strobe lht mounted under streetside loader access ladder with lhted toggle switch in cab Amber strobe lht mounted center of head board with lhted toggle switch in cab Two forward and two rear facing work lhts mounted at loader frame and protected by access ladders with lhted toggle switch in cab Body painted black, wood sides are not to be painted Triangular warning reflector kit mounted in cab 3A-40BC, 5 lb.

Buy & Sell Used Equipment & Heavy

Buy & Sell Used Equipment & Heavy

Post are spaced on approximately 54” centers (4) ratchet strap hold-downs installed in channels (for lateral adjustment) under bed streetside (2) access ladders with grab handles for access to flatbed one curbside and one streetside Rear pintle hook, properly reinforced to chassis frame Top of hitch to be located 24” above ground level Includes lhting socket and brake pedal controller Front bulkhead / rail rack to be constructed of 4” x 4” x ¼” wall steel tubing with outside dimensions of 102” wide x 63” hh installed directly behind chassis cab.

Symons Crusher Parts - Symons / Gyradisc

Hydraulic extendable stabilizer extension beams to 23”.


Nordberg g series crusher manual:

Rating: 91 / 100

Overall: 89 Rates